Этот прибор включает в себя осциллограф, интегрированный анализатор спектра, генератор произвольной функции, логический анализатор, анализатор протоколов, и цифровой вольтметр / счетчик.

Спецификация:

Key performance specifications

• Oscilloscope
  • 2 and 4 analog channel models
  • 1 GHz, 500 MHz, 350 MHz, 200 MHz, 100 MHz bandwidth models
  • Bandwidth is upgradable (up to 1 GHz)
  • Up to 5 GS/s sample rate
  • 10 M record length on all channels
  • >280,000 wfm/s maximum waveform capture rate
  • Standard passive voltage probes with 3.9 pF capacitive loading and 1 GHz, 500 MHz, or 250 MHz analog bandwidth
• Spectrum Analyzer
  • Frequency range
    • Standard: 9 kHz - oscilloscope bandwidth
    • Optional: 9 kHz - 3 GHz
  • Ultra-wide capture bandwidth up to 3 GHz
• Arbitrary Function Generator (Optional)
  • 13 predefined waveform types
  • 50 MHz waveform generation
  • 128 k arbitrary generator record length
  • 250 MS/s arbitrary generator sample rate
• Logic Analyzer (Optional)
  • 16 digital channels
  • 10 M record length on all channels
  • 121.2 ps timing resolution
• Protocol Analyzer (Optional)
  • Serial bus support for I²C, SPI, RS-232/422/485/UART, USB 2.0, CAN, LIN, FlexRay, MIL-STD-1553, and Audio standards
• Digital Voltmeter (Free with product registration)
  • 4-digit AC RMS, DC, and AC+DC RMS voltage measurements
  • 5-digit frequency measurements

• FastAcq™ high-speed waveform capture rate finds elusive signal anomalies quickly
• Wave Inspector® Controls provide easy navigation and automated search of waveform data
• 33 automated measurements and waveform histograms for simplified waveform analysis
• TekVPI® probe interface directly supports active, differential, and current probes for automatic scaling and units
• 9 in. (229 mm) WVGA widescreen color display
• Small footprint and lightweight – Only 5.8 in. (147 mm) deep and 9.2 lb. (4.2 kg)
• Spectral Analysis
  • Dedicated front-panel controls for commonly performed tasks
  • Automated peak markers identify frequency and amplitude of spectrum peaks
  • Manual markers enable non-peak measurements
  • Trace types include: Normal, Average, Max Hold, and Min Hold
  • Spectrogram display enables easy observation and insight into slowly changing RF phenomena
  • Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW)
• Arbitrary Function Generation
  • Generate predefined signals to quickly simulate missing devices in designs
  • Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG
  • Add noise to any signal to easily perform margin testing
• Mixed signal design and analysis
  • Automated triggering, decode, and search on parallel buses
  • Multichannel setup and hold triggering
  • MagniVu™ high-speed acquisition provides 121.2 ps fine timing resolution on digital channels
• Protocol Analysis
  • Trigger, decode and automatically search on packet-level content on most common embedded design serial bus standards.
  • Export protocol decode tables for use in documenting results
• Digital Voltmeter and Frequency Counter
  • Quickly validate voltage or frequency measurements at a glance
  • Graphical readout provides information on stability of the measurement
• Fully upgradeable
  • Add functionality, increase bandwidth or spectrum analyzer frequency range over time as your needs change or budget allows

• Power analysis
• Limit and mask testing

Стартовая цена от производителя $3,350

Даташит в формате PDF 

http://info.tek.com/www_mdo3000oscilloscope-oneisthenewsix.html#thesixinone